@AaronLei0This is a site that went with a theme of :p_orange://github.com/aaronsfunstuff/car-hub/commit/26d37d17e4f4e439b4f2e74ba7ff33182414eccc> THERE IS NO NSFW IN THIS
@JAIAAKASHG0#include <ESP8266WiFi.h>
// Replace with your network credentials
const char ssid = "Airtel_PRAKASH";
const char password = "9941113669";
// Set web server port number to 80
WiFiServer server(80);
// Variable to store the HTTP request
String header;
// Current state of the buzzer
String buzzerState = "off";
// Assign GPIO pin for the buzzer
const int buzzerPin = D2;
void setup() {
Serial.begin(115200);
pinMode(buzzerPin, OUTPUT);
digitalWrite(buzzerPin, LOW);
// Connect to Wi-Fi network
Serial.print("Connecting to ");
Serial.println(ssid);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(1000);
Serial.print(".");
}
// Print local IP address and start web server
Serial.println("");
Serial.println("WiFi connected.");
Serial.println("IP address: ");
Serial.println(WiFi.localIP());
server.begin();
}
void loop() {
WiFiClient client = server.available(); // Listen for incoming clients
if (client) { // If a new client connects,
Serial.println("New Client."); // print a message out in the serial port
String currentLine = ""; // make a String to hold incoming data from the client
while (client.connected()) { // loop while the client's connected
if (client.available()) { // if there's bytes to read from the client,
char c = client.read(); // read a byte, then
Serial.write(c); // print it out the serial monitor
header += c;
if (c == '\n') { // if the byte is a newline character
if (currentLine.length() == 0) {
// HTTP headers always start with a response code (e.g. HTTP/1.1 200 OK)
// and a content-type so the client knows what's coming, then a blank line:
client.println("HTTP/1.1 200 OK");
client.println("Content-type:text/html");
client.println("Connection: close");
client.println();
// Display the HTML web page
client.println("!DOCTYPE html<html>");
client.println("<head><title>ESP8266 Buzzer Control</title></head>");
client.println("<body><h1>ESP8266 Buzzer Control</h1>");
client.println("<p>Buzzer State: " + buzzerState + "</p>");
client.println("<p><a href=\"/H\"><button>ON</button></a></p>");
client.println("<p><a href=\"/L\"><button>OFF</button></a></p>");
client.println("</body></html>");
// The HTTP response ends with another blank line
client.println();
break;
} else { // if you got a newline, then clear currentLine
currentLine = "";
}
} else if (c != '\r') { // if you got anything else but a carriage return character,
currentLine += c; // add it to the end of the currentLine
}
// Check if the client is requesting the buzzer to be turned on or off
if (header.indexOf("GET /H") >= 0) {
Serial.println("Buzzer ON");
buzzerState = "on";
digitalWrite(buzzerPin, HIGH);
} else if (header.indexOf("GET /L") >= 0) {
Serial.println("Buzzer OFF");
buzzerState = "off";
digitalWrite(buzzerPin, LOW);
}
}
}
// Clear the header variable
header = "";
// Close the connection
client.stop();
Serial.println("Client disconnected.");
Serial.println("");
}
}
@TheScientist1010I just made a PR for #arcade to fix the truncation on the scrapbook banking messages. Idk if it works, and it was literally 1 line of code (so I don’t expect any tickets from this), but it’s the first PR I’ve made in a while so hey!
I can’t show any pictures of it in action (since it hasn’t been accepted yet), but here’s a thread of the issue.
hackclub.slack.com/archives/C0266FRGV/p1718717652692109
@Nikhil0#hack-hour fixed some bugs with the camera to make it zoom out as the player go farther apart.
@ShubhamPatil0shopping list item: survive physics :duck-duck-dino-orpheus:
@jzaleta0So recently I've been thinking on open source and projects abandonment, and the Google :google: Graveyard 🪦 is a very good example of some of their projects that have been left. :dead: Also today I'm studying for my mid exams and working on projects! Here's an image of my scrapbook before this post. :hack-club: So the point of this is that I'm going to be looking for some abandoned projects that looks for help in order to make a small contribution and bring them back! Maybe with design or documentation while I get better at code! And lastly, I'm going to delete my Twitter Account :twitter: , I never got to really use it and I would like to avoid the toxicity and problems and better make a blog / part of my website where I post my ideas on things! 💡
@Odyssey3460Please don't give me resources to bake shit.
@lailahn0Days 14&15 of getting my life back together(because I forgot to post yesterday😭): I’ve mainly just been continuing school work and essays! My mom took me out shopping bc of my SAT score 💀
@kayley0🎹 Haven't played the piano in awhile, so decided to randomly sightread a piece; could have gone a lot better.@kayley0So, this is how my day is going so far...
